Zebra barcode printer drivers

• Download a Zebra printer driver (below)            • Alliance Zebra Printer Configuration Program            • Installing Zebra printers for PaperChase using Windows 7 or Vista

---------------------------------------------------------------------------------------------------------------------------------------------------------

Zebra Designer Printer Driver v 2.6.42.03 for Windows XP, 2003, 2008, Vista, Windows 7  32 bit and 64 bit (approx 8Mb)

Release Date May 2010, Windows Certified, 32 bit and 64 bit

Zebra Designer barcode printer driver - suitable for Zebra GK420t, GX420t, TLP 2844z etc.

Download and unzip ZD_2.6.42.03_Certified.exe (self extracting exe)

Extract and then run PrnInst.exe

---------------------------------------------------------------------------------------------------------------------------------------------------------

Zebra Designer Printer Driver v 1.3.08 for Windows XP, 2003, Vista 32 bit (approx 10Mb)
(an older driver for Windows Vista)

Zebra Designer barcode printer driver - suitable for Zebra GK420t, GX420t, TLP 2844z etc.

Download and unzip  ZD1308 (self extracting exe)

Extract and then run PrnInstZBR.exe

---------------------------------------------------------------------------------------------------------------------------------------------------------

Zebra Universal Printer Driver v 5.2.3.8 for Windows 98, 2000 and XP (approx 3Mb)
(not suitable for Windows Vista or Windows 7)

Zebra barcode printer driver - suitable for Zebra TLP 2844z, T402 etc.

Download and unzip  ZUDv5238 (self extracting exe)

Extract and then run Setup.exe

---------------------------------------------------------------------------------------------------------------------------------------------------------

Zebra Printer Test and Configuration program

Here is the Alliance Zebra Printer Test and Configuration Utility...

Download  alliancezebraconfigure.zip and unzip (into C:\Program Files\Paperchase if you wish).

Double click AllianceZebraConfigure.exe to run.

Select your Zebra printer from the dropdown and press 'Open Printer' to open the printer.

Usually start by pressing 'Power On Reset' (this will reset the printer, the lights will go off and on again).

Then press 'Load Factory Default Settings', and make sure 'Set Web Sensing' and 'Set Thermal Transfer' are ticked. Label width should typically be 4" (102mm), and Print Speed 4" per second.
Print darkness can vary, but 16 is a good starting position.

Then press 'Save Current Settings to Printer'

Then 'Calibrate Label Sensor' (this feeds labels through, and tells the printer what size labels you are using).

Optionally 'Print Configuration Label' (this gives you a printout of the printer settings)

You should then print some test labels, choosing the size and quantity. 

------------------------------------------------------------------------------------------------------------------------

Home Records Management Document Management Imaging for Windows Document Scanning Document Scanners Barcoding